OHB Off Highway Blinds 

The end caps are bifid and can be adjusted in grids. This means that variable installation conditions can be accommodated. The hook function is achieved by a fastener in the draw flap or by stop pins on the drawbar (both on the left and right-hand sides).

Stop pins, hook-on buttons and fastening materials are not included in the item supplied.

Screw-on width (A): 600 // 700 // 800 // 900 // 1000 // 1100 // 1200 mm

The end caps are bifid and can be adjusted in grids. The fabric is guided laterally by means of rods with counter-brackets.

The locking devices clamp down sideways on the rods and ensure that the roller blind system is infinitely adjustable. This means that the blind can be used in a similar manner to a scissor-type unit but can cover a greater range of extended lengths.

Fastening materials are not included in the item supplied.

Screw-on width (A): 600 // 700 // 800 // 900 // 1000 // 1100 // 1200 mm.

The end caps are bifid and can be adjusted in grids. The fabric is guided laterally by means of rods with counter-brackets or inside a U-shaped profile.

The locking devices clamp down sideways on the rods and ensure that the roller blind system is infinitely adjustable. This means that the blind can be used in a similar manner to a scissor-type unit but can cover a greater range of extended lengths.

Fastening materials are not included in the item supplied.

Screw-on width (A): 600 // 700 // 800 // 900 // 1000 // 1100 // 1200 mm. 

The end caps are bifid and can be adjusted in grids. A fixture is attached to the centre of the blind cassette for fastening the scissor mechanism. The opposite end of the scissors is attached to the drawbar. For reasons that are inherent in the system the extended length is limited to 350 mm.

Fastening materlals are not included in the item supplied.

Screw-on width (A): 450 // 700 // 900 mm.

DETAILS :